It would be much helpful if additional tools to select entities like Nodes, Beams etc., in the polar coordinate system i.e., specifying the start and end radius (or diameter) and start and end angles. This helps a lot if we need to select the enti...

The possibility of adding an 'AI Assistant' type tool, for example: "Alexa" or "Siri", which with natural language is able to interpret what the user asks for and execute the orders requested.

In India many Columns are made with 4 leg of angle with lacing of rod or angle(built-up) STAAD have option of design back to back but it is not have front to front angle configuration

Can you provide calculations which are similar to the connection design, i.e. include detailed calculations as well as formulas?

Helps in assessing the actual slenderness ratio of each member.Also, such table can be used to upgrade to next size for better load carrying capacity.

For the Structure Wizard in the Analytical workflow:- Mouse Zoom behavior could be aligned with that of the STAAD interface (in STAAD - scroll up is zoom-in and scroll down is zoom-out) Pan by mouse could be advantageous, so is exiting the PAN mod...

Staad pro should have an option to model each and every type of staircase like single flight (straight)stairs,dog ledged strair, spiral stair, U shape stairs,L shape stairs,winder, double winder, 2 quarter winder, 2 quarter landing,curved staircas...

Hello i would like to give a suggestion when modelling a structure and create a mesh using parametric model after generating mesh we know the beams are broken into parts depending on the mesh size, if one decides to delete the mesh, then the disin...

Hello dev team, As of now, STAAD cannot show the section shape from section wizard . This issue may make the engineer confuse about local axis even we can referent to the (v,u) axis. its will be good if STAAD can show the section shape that custom...

In load data page when you select any specific UDL or point load, then the UDL or point load associated beam and node shall be auto selected or highlighted. this will help to identify if load applied is at right location or not