It is hoped that the method of adding stiffeners in the design of American standard column bases can be increased, and it is best to be customizable. For example, extending plate stiffeners can be set on the web of the I-beam.

There is no way to add wind load in other direction in case of unclad building. For example : - staad taking load case only in one direction i.e. +X, whenever I try to add another case in z direction, previous case gets deleted automatically. So, ...

Just as the title. To be able to analyze a structure with Tension-Only members using the Direct Analysis Method.

Connections design using angle & channel connections should be added in ram connection

In the new staad edition standard sections were added in addition to legacy.but when standard scetions were used, the analysis file cant be imported to RCDC.please solve this as there are new standard sections added which are not available in legacy.

Provide the ability to have horizontal moving loads in addition to the vertical loads. For example, ASCE 7 requires cranes to be designed for vertical loads and horizontal loads. It would be great if STAAD had the ability to have both the vertical...

For Inclusion of built up section in standard I section combination with Channel section on top flange, which is widely used for gantry girder.

Eurocode checks for aluminium members

Currently the only way to check the deflection of a slab is to review the deflected shape of the shells' mesh, or in the tabulated results. It would be very useful if the contour plots for shells included the option to contour deflections as well ...

Steel Auto-Drafter draws member releases with a 20mm offset by default. The user would like to set this offset distance to an arbitrary distance. Additionally, the user would like to set separate distances for each of the following members: ...