STAAD does not have NZS 1170.5 in its Seismic Codes. Users in ANZ uses custom spectrum and factored it up to match the base shear. Adding this code will help the users in ANZ work directly with the NZ code and thus speed up their productivity. Use...

automated tool for hydrostatic loading should be included

HDR designs many concrete water tanks (round and square). We use STAAD to generate a FEM mesh and then use the stresses to design the concrete elements with load factors unique to ACI-350.

Many codes, particularly IS 1893 part-2 and IS 3370 part-2, the RCC elevated/underground water retaining structure should be analyse and design in "TANK ENPTY" and "TANK FULL" both of the conditions, but staad pro seismic definition whether it is ...

Hi, I am wondering when STAAD RCDC would be equipped with CSA A23.3? Thanks

Beam FB111 is secondary beam and beam FB347 to FB350 is primary beam. We want beam numbering reverse. Primary beam should have one number and secondary beam should split into four different numbers. We don't want group name in output file.

Staad foundation advance supports design of structural strap of strap foundation as per ACI code , i.e not designed the structural strap of strap foundation as per Indian code. Hence add the features of design strap foundation along with structura...

As we know in R.C structures we may need to provide holes in beam for service purposes. I am here attaching a book showing examples on the design of beams with holes. [View:/cfs-file/__key/telligent-ideas/03d5f738-7ee6-4ff2-9384-201f3d5dd0d9/Concr...

It will be helpful if a function for applying the hydrostatic forces on plate elements either by selecting a group of plates or a selecting a single plate e.g., the PlateID and the pressure at four corners of the plate. Many a times applying the p...

Hello i would like to give a suggestion when modelling a structure and create a mesh using parametric model after generating mesh we know the beams are broken into parts depending on the mesh size, if one decides to delete the mesh, then the disin...