Skip to Main Content
Need Support? Let’s guide you to the right answer or agent.
ADD A NEW IDEA

STAAD Concrete

Showing 59 of 412

Update of Canadian Code CSA 23.3 in STAAD Pro

For the design of concrete structures and foundations that will require permit approval in Canada, a recent code is expected. CSA code available in STAAD Pro Connect Edition is still CSA 23.3-94. Currently the latest code is 2019 but the 2014 is a...
over 2 years ago in STAAD Concrete 4 Planned

Equipment Foundation design in STAAD Foundation Advanced 2023

As Legacy versions, it would be useful to have options to design Plant equipment foundation (vertical vessels, exchangers, tank ring wall foundations, etc.) to STAAD Foundation Advanced 2023. Please add this feature at the earliest.
5 months ago in STAAD Concrete 2 Planned

RCDC - Update Water Tank workflow using ACI code

Currently, water tank design is only available for the Euro Code. Please update for use with current ACI code.
3 months ago in STAAD Concrete 0 Needs review

RCDC Foundation Overturning Safety Factor

similar to the sliding & uplift factors, would be helpful if there's an option to enter Overturning safety factor also.
about 1 year ago in STAAD Concrete 1 Needs review

BEAM DEFLECTION CHECK IN RCDC

This check should be implemented in RCDC as we know during design the reinforcement area maybe needed to be increased in order to pass the beam deflection check
almost 2 years ago in STAAD Concrete 1 Needs review

Possibility of Importing latest etabs file in RCDC

Currently we cannot import Etabs latest version files in RCDC. Creating a .accdb file takes a lot of time. So this capability is essential
8 months ago in STAAD Concrete 0 Needs review

STAAD FOUNDATION BEARING PRESSURE DISPLAY FOR UPLIFT CASES

Currently in staad foundation max/min bearing pressure is shown only for the compression cases.Incase the minimum pressure is governed in uplift case the same is not shown in the summary table.Same can be updated in upcoming revisions.Also the bea...
over 1 year ago in STAAD Concrete 2 Needs review

adding clone job in the 'job setup' in STAAD Foundation

we conventionally add a new job and assign all the parameters from scratch while trying to replicate a similar footing desing within the same STAAD.Foundation file. however adding a cop/replicate/clone job might save time avoid the chance of missi...
11 months ago in STAAD Concrete 0 Needs review

RCDC - Option to carry out Combined Footing Design and Detailing in RCDC

There should be a feature in RCDC whereby you can group selected footing for combine footing design and detailing. Or, after RCDC is finish footing designs and the distance between adjacent footings are below a specified minimum, then RCDC should ...
almost 3 years ago in STAAD Concrete 0 Needs review

RCDC - Beam Design - Long term deflection check should be available

For the structures like Metro railway station and Industrial buildings, Clients are demanding to perform the long-term deflection check of the beam. RCDC should allow to perform the long-term deflection check for the beams selected by the user. Ge...
almost 2 years ago in STAAD Concrete 1 Needs review