We request the reintroduction of the moment diagram and the detailed formulas used during the flexural check in the report generated by STAAD Foundation Advanced V2024 (SFA V2024), as shown in previous versions of the software (SFA Version V9). Th...

The current structural analysis report includes all load combinations from the model, including duplicates and combinations that will not be used for foundation design. This can result in lengthy reports with irrelevant information, especially whe...

In STAAD Foundation Advanced (SFA) v24, the required workflow for designing combined or isolated footings depends on exporting the structural model from STAAD.Pro, including both load reactions and load combinations. Unlike mat foundations, which ...

Implement a function in STAAD Foundation Advanced (SFA) v24 that allows, as it was done in previous versions of the software: Automatically generate detailed metric computations for the designed foundations. Include the "Excavation" item with the ...

Problem Description: STAAD Foundation Advanced version 24(SFA) imposes an eccentricity limit of 300 mm in both directions when designing combined footings. This restriction limits the ability to accurately model combined footings with eccentriciti...

Include the following summary tables in the output report of STAAD Foundation Advanced v2024 within the "Analysis" section, applicable to both combined and isolated foundations. Support Reactions Node Displacements Shell Stresses Currently, these ...

Request for Function Creation in OpenSTAAD to Modify Response Spectrum Direction in X, Y, and Z We are working with OpenSTAAD and need to programmatically modify the response spectrum direction values in X, Y, and Z. In the attached image, the val...

Although the current version of SFA 2024 allows users to view the proposed reinforcement using the Detailing option and take a manual screenshot from the Report tab to include it in the report, this image must be added manually and can only be pla...

Include in the calculation output report the data corresponding to ground level and water table depth in STAAD Foundation Advanced V2024. Currently, the report displays parameters such as: Friction coefficient Passive pressure coefficient Subgrade...

Proposal: It is suggested to restore the graphical format used in version V9 for representing foundations in both plan and elevation views within the output reports generated by STAAD Foundation Advanced. The drawings in version V9 were well-dimen...