All professional, practicing engineers would benefitted. One click analysis and one click reinforcements design of any types of tank UG/elevated of any shapes like RCDC.

Now, Staad.Pro includes the option of Reducible Live Load by UBC/IBC. But the formula included is 16-23 instead of 16-22. Also, Staad uses equation 16-23 for load type Live and type Roof Live, instead of using section 1607.11 for Roof Live and equ...

Hello, There’s no point in applying the notional load against other lateral loads. In STAAD, it’s possible that the Load Combination where automatically generated so the notional loads are generated for all directions even if they countermeasure t...

-In order to easily sort the results in Excel when importing a Result table, it would be a lot more helpful to repeat the node number on each row of the Support Reactions table & Displacements table. -Same comment for the beam number and L/C o...

STAADpro is not able to design cold form section outside the standard library or any user defined cold form section as per IS801. This is severe limitation as many users are using sections of their choice which are not in the library. This is espe...

At present design of double channel in STAAD as per IS800 LSD is having certain work flow. It assumes higher MI as a major axis even if it can be about minor axis Y which is not correct. STAAD should consider section orientation as provided by use...

In most of the industrial sheds, double I section spaced apart is used as crane column and single I section is used to support the roof above. In present STAADpro ver 24 facility to design double I section as per IS800 LSD is not available . This ...

dear staad pro team,i think more important things for shar wall system building for high rise building is property modifires for wall,it is misssing in staad pro i dont know why?all softwares have this important feature why is missing in staad?

Set parameters and have the program create a plate mesh automatically for finite element analysis.

The "actual ratio" button in postprocessing mode is not working for a lot of users in Subsea7. This button is supposed to re-arrange beam utilizations from default beam number order, to utilization ascending order, and is very helpful. The problem...