It will be helpful if a function for applying the hydrostatic forces on plate elements either by selecting a group of plates or a selecting a single plate e.g., the PlateID and the pressure at four corners of the plate. Many a times applying the p...

Have the material properties from the Staad analysis import from staad.

STAAD does not have NZS 1170.5 in its Seismic Codes. Users in ANZ uses custom spectrum and factored it up to match the base shear. Adding this code will help the users in ANZ work directly with the NZ code and thus speed up their productivity. Use...

Many codes, particularly IS 1893 part-2 and IS 3370 part-2, the RCC elevated/underground water retaining structure should be analyse and design in "TANK ENPTY" and "TANK FULL" both of the conditions, but staad pro seismic definition whether it is ...

I would like to import a Staad model to SFA then design a pile cap based on the reactions and then design the piles supporting the pile cap. I see that there is a drilled pier module within plant foundations, but I can't seem to import the loads. ...

Staad pro should have an option to model each and every type of staircase like single flight (straight)stairs,dog ledged strair, spiral stair, U shape stairs,L shape stairs,winder, double winder, 2 quarter winder, 2 quarter landing,curved staircas...

Till now, staad pro has an option to assign plates of various thickness, but it should also have an option to model such plates in TRAPEZOIDAL PATTERN as shown in below images,which is frequently used to model raft foundation, also placement and b...

Optimization of steel structure in staad pro as per (Indian code like IS-800 _2007, IS-801 etc. has many limitations till now. It has to be resolved earlier, Some of limitations are ~ optimization for tapered sections not supported by staad ~ opti...

Now a days, construction of high rise building are very common in India, and it is very necessary to implement code for the same like IS 16700 with new amendments in 2023, kindly implement the same in staad as early stage, with all clauses like co...

Anyone who perform post-processing/detailed analysis on plated structures will benefit from this. The function could take a plate ID and loadcase as input, and give plate corner stresses for all corners as output.