As per actual possibility provided by AISC 360, it is possible to perform design with Direct Analysis Method but also Effective Length Method and First Order method. In some case it is useful to do analysis with First order method (Dynamic Seismic...

WHILE CREATING A LATTICE FRAME WE NEED TO OPT FOR TWO ANGLES APART FRONT TO FRONT, BUT AS OFF NOW STAAD ONLY PROVIDES DOUBLE ANGLE WITH BACK TO BACK CONFIGURATION AND NOT FRONT TO FRONT, THUS IT IS REQUESTED TO ADD UP DOUBLE ANGLE SECTION WITH FRO...

Analysis & Design option for Self supporting roofing sheet recommended by RDSO , GOI .........Proflex company MNC is majorly manufacturing those roofing sheets........ The irregular shape of sheet is difficult to model & analyse in staad p...

Let me request to provide the help and Users Manual of Japanese language in Staad pro. Currently It is not existing. So Japanese user cannot use Staad pro as the Calculation Note for Architectural application to Japanese government. If there is it...

STAAD currently has only LX and LY parameters but does not have separate parameters for cases where a beam has only the top flange restrained or only the bottom flange restrained. It would be useful if both were separated.

There is a new code for Stainless Steel that has been published by AISC. It would be nice to incorporate the code checks for AISC 370 for materials that have been selected as stainless steel.

It will be better is auto load combination for following IS codes, IS 802 Part 1/Sec1 2015 - Clause 13 - For Transmission tower Design IS 802 Part 4 2023 - Clause 13 - For latticed switchyard structure Design As of now only design code of IS 802 i...

It is hoped that the method of adding stiffeners in the design of American standard column bases can be increased, and it is best to be customizable. For example, extending plate stiffeners can be set on the web of the I-beam.

Please inform the date of release of staad pro/RCDC for Design of Various type of Ground Level and Overhead Water tanks as per IS3370

In staad foundation designing, hoped that desinger can specify any bar diameter and spacing when configuring rebar, rather than selecting the diameter and spacing provided by the software. It is a very useful feature. Other software can also achie...