The ability to add reference labels to geometry (or note), so when the whole model is displayed you can have visual reference of what each item represents, ie label gridlines, elevations

Report generation is significantly improved in the latest version. it will be great, If user able get the beam & column design details like , grade of concrete, member size, reinforcement required, reinforcement provided etc. in an table forma...

This is a test without logging in

Please prepare a UC summary table Profile size wise, Group Wise from ejoumale.pajamale@technipenergies.com

It shall be noted that, if solids are not oriented properly than, we are not able to assign properties to the model, and it is difficult to see which the bod is solid. -- With Regards. Ankur Jain -- Model Attached is confidential.

Please, add Brazilian codes: Some of the most important codes: ABNT-NBR 6118 (concrete design) ABNT-NBR 6122 (foundations design) ABNT-NBR 8800 (hot-rolled steel design) ABNT-NBR 14762 (cold-formed steel design) ABNT-NBR 7190 (wood design) ABNT-NB...

In RCDC we are using 2 types of Design Codes Combinations like this. IS 456 + IS 13920-1993 IS 456 + IS 13920-2016 Can't we have Third Design Code IS 456 + IS 13920-1993 + IS 13920-2016 in RCDC (SACD) or STAAD Pro like this? Because In IS 456 w...

Provide a method to provide the design data to calculate the lateral drift using the methods provided by Verco Decking inc. https://vercodeck.com/

We have recently encountered an issue whereby the software will automatically assume that a custom section is an I-section (W-Section) for code checking purposes. This is not ideal if the section is, for example a modified RHS section, for which t...

Load Group (as reference load) in Physical Modeler should show all loads of same category in a single spreadsheet instead of separate spreadsheet similar to analytical reference load