In staad foundation designing, hoped that desinger can specify any bar diameter and spacing when configuring rebar, rather than selecting the diameter and spacing provided by the software. It is a very useful feature. Other software can also achie...

similar to the sliding & uplift factors, would be helpful if there's an option to enter Overturning safety factor also.

Please add an option to generate an image report for every load case. The image report are showing how the forces are affecting the structure (see attached screenshots). Currently it is only possible to manually create a screenshot for each load c...

This check should be implemented in RCDC as we know during design the reinforcement area maybe needed to be increased in order to pass the beam deflection check

When STAAD Foundation calculates the reinforcement of the foundation, it is hoped that the function of manually defining the diameter and spacing of the reinforcement bars can be added. As desinger can choose any diameter and space of rebar to imp...

It will be better is auto load combination for following IS codes, IS 802 Part 1/Sec1 2015 - Clause 13 - For Transmission tower Design IS 802 Part 4 2023 - Clause 13 - For latticed switchyard structure Design As of now only design code of IS 802 i...

In STAAD.Pro Advanced 2024, please add tool to adjust the scale (size) of the "Beam Orientation" arrows. it is impossible to distinguish from one member to another with the arrows so large.... this was an isolated view of a portion of a much large...