Pipelink is quite rudimentary. It does not provide the ability to assign guide supports to different nodes. For example, horizontal loads need to be applied to Vertical Members, while vertical loads need to be applied to Horizontal Members. The sa...

Please provide report data in txt format for export in versions after 2023, as we need to maintain consistency with previous versions

Please could you incorporate some "basic functions" of Excel spreadsheet Tables into "STAAD Results table". This could be a row (with drop down tools) at the Top of the results tables. At the very least, just a few of these functions may help such...

Currently in Column Design, RCDC has a limit on the maximum value of the effective length factor and users cannot modify this limit value 5. I want RCDC to lift the restriction on this factor. In my case as per attached staad, Column effective len...

Are there any plans to use the Water Tank module in Structure Wizard in the Physical Modeler to create a retaining wall module? It seems like this could be developed easily from the water tank module.

It would be much helpful if additional tools to select entities like Nodes, Beams etc., in the polar coordinate system i.e., specifying the start and end radius (or diameter) and start and end angles. This helps a lot if we need to select the enti...

The possibility of adding an 'AI Assistant' type tool, for example: "Alexa" or "Siri", which with natural language is able to interpret what the user asks for and execute the orders requested.

It is understood that while performing response spectrum analysis, the scale factor (V_b/V_B ) Where,V_b=Equivalent static base shear,〖 V〗_B Response spectrum base shear), is automatically accounted for calculation of design base shear. But,this s...

While doing design of beam using Staad file interface at each level selected beams need to be design as per Staad design envelope. 1) Along X-direction grid design will be one envelope. 2) Along Z-direction grid design will be second envelope. 3) ...

Staad by default adds some materials to the model (please refer to the snapshot attached). Majority of these will not be used during automation (as the materials will be created separately based on the need) and hence the materials section remains...