STAAD Foundation Advanced 2024 restricts the subgrade modulus to a range of 400-120,000 kN/m²/m. This limitation prevents accurate modeling of soil conditions outside this range, which is necessary for my current project. The subgrade modulus valu...

Significant improvements to the "Connection Design" module of STAAD Pro are requested to enhance safety and efficiency in the design of base plate connections. This would be achieved through: Advanced Concrete Verifications: Implement comprehensiv...

We kindly request considering the inclusion in the load combination generator aids of the option to independently input the multiplier values according to ASCE (Rho, Qe, Omega x, Omega z, Cdx, Cdz, I) for the different types of combinations. Pleas...

We would like to propose the incorporation of an image in the input data that shows the selection in the structure of the connections being calculated. This functionality would apply to the calculation reports exported by the "Connection Design" m...

I would like to suggest a significant improvement to the software. Currently, marking each connection one by one in engineering drawings is time-consuming and prone to errors. It would be extremely useful to link the connections generated in Conne...

Direct Interoperability and Intelligent Mapping: Integrate STAAD Pro, STAAD Foundation, Revit, and Advance Steel with native plugins or features for one-click model transfers. Implement an automatic and precise mapping system for materials and sec...

I Need to design lot of platforms with cantilever beams. Tapered channel is easy to fabricate in plate and most economical section for cantilever conditions. Hence I request you to include this options in the staad. Moreover, tapered I is already ...

There is currently no way, other than directly adding rigid body members with the necessary releases, to simulate an an axial angle or tee member (brace) under eccentric axial load. This causes a high amount of manual calculations to determine the...

Currently, EN 1993-1-1 provide in STAAD.Pro is 2005 edition. My request is to update the code to the latest edition, 2023.

Sometimes these drawings are sent to other colleagues that do 3D modeling, and sometimes do not know that W200x27 TEE === WT100x13. It would be an improvement for the Schedule of Sections and MTOs show the correct WT callout, when a STAAD users sp...