Currently, if there are multiple design blocks present in a STAAD model, in the post-processing utilization table, design ratio from the last design block is reported. It is very common to define multiple design blocks with different set of parame...

when I use RCDC, the column failed to crack-width,but I want to know the result of failed column crack-width value and calcute to deside how to update the model, update Longitudinal reinforcement or stirrup

Need a function similar to Midas automatic coupling plate element boundary

It will be helpful if a function for applying the hydrostatic forces on plate elements either by selecting a group of plates or a selecting a single plate e.g., the PlateID and the pressure at four corners of the plate. Many a times applying the p...

Structure discontinuties provided for thermal expansion isn't allowed in dynamic analysis, so provide feature so that we can analyse such structure without separating the model in individual file..

Widely used in industry

Pipelink is quite rudimentary. It does not provide the ability to assign guide supports to different nodes. For example, horizontal loads need to be applied to Vertical Members, while vertical loads need to be applied to Horizontal Members. The sa...

Please provide report data in txt format for export in versions after 2023, as we need to maintain consistency with previous versions

Staad should have one option which helps to create a report of node labels ( tier/levewise) for whole structure. Also a report of beam labels ( tier / levelwise) for the whole structure. Also report of section property ( tier/levelwise) for whole ...

Currently in Column Design, RCDC has a limit on the maximum value of the effective length factor and users cannot modify this limit value 5. I want RCDC to lift the restriction on this factor. In my case as per attached staad, Column effective len...